From poor ventilation calculations to incorrect exhaust piping back-pressure. Ensure your generator installation complies with OEM engineering standards.
A brand new Caterpillar or Perkins generator can suffer catastrophic overheating within hours of startup if the physical plant room was improperly designed. At DEC, our engineering team regularly inspects faulty third-party installations suffering from critical design oversights.
For every liter of diesel burned, an engine requires thousands of cubic meters of fresh combustion and radiator cooling air. If air inlet louvers are undersized, or if hot radiator discharge air recirculates back into the intake, ambient room temperatures skyrocket above 50°C, causing continuous high-temp engine de-rating.
Running lengthy exhaust pipes with multiple 90-degree elbows without increasing pipe diameter generates excessive exhaust back-pressure. This restricts turbocharger scavenging, causes high exhaust gas temperatures (EGT), and rapidly destroys exhaust valves.
Flexible stainless steel exhaust bellows and flexible fuel lines are mandatory between the vibrating engine skid and fixed building walls. Rigid piping transmits intense vibrations that cause weld cracking and catastrophic fuel line ruptures.
A concrete foundation slab should weigh at least 1.5 to 2 times the total wet weight of the generator set to absorb mechanical resonance and prevent long-term structural foundation cracking.
Our 24/7 technical team is available across Pakistan for immediate consultation.
Engineered and verified by master technicians with over a decade of hands-on experience in Perkins, Cummins, and Caterpillar industrial power systems.
Get expert advice, a tailored power solution and a fast quotation for your site. Emergency response teams active 24/7 across Pakistan.